SZG Series Double Cone Rotary Vacuum Dryer
SZG Series Double Cone Rotary Vacuum Dryer
  • Photo

SZG Series Double Cone Rotary Vacuum Dryer

Description

Features1. The double cone rotary vacuum dryer can perform mixing and drying functions simultaneously. It also features an optional solvent recovery unit.2. Advanced design with a simple mixing/drying chamber that is easy to clean.3.The walls of the i…
Inquiry
+86-13806125772
SZG Series Double Cone Rotary Vacuum Dryer

Features

1. The double cone rotary vacuum dryer can perform mixing and drying functions simultaneously. It also features an optional solvent recovery unit.

2. Advanced design with a simple mixing/drying chamber that is easy to clean.

3.The walls of the inner chamber are designed to steadily rotate and prevent any accumulation of raw materials. This leads to a high coefficient of thermal transmission and results in a quick drying time.

4. This vacuum dryer is an extremely energy efficient drying source and can be used for large quantities of raw materials.

5. Widely used for drying applications for the pharmaceutical, chemical, food and dye industries. Meets GMP requirements.

6. Since the container runs continuously, the heating surface is uniform and will not result in uneven heating which can lead to material burning.

7. No pollution output due to the indirect heating source.

8. Thermal efficiency is two times higher than normal drying ovens.


Principle of Work

The SZG model double cone rotating vacuum dryer features two conical tanks that rotate as they dry and mix raw materials. The heating/mixing chamber is kept in a vacuum state during operation for maximum drying effectiveness. Vaporized moisture from the materials is pumped out through the vacuum exhaust system. Because of the dynamic nature of the drying tanks, the machine is perfect for efficient and uniform drying applications.



Sketch of Structure



Application

This drying equipment is mainly used for drying the following materials for medicine, chemical and food applications.
1. Thermally sensitive matter.
2. Matter that is easily oxidized.
3. Crystalized matter.
4. Volatile materials.
5. Materials that require moisture collection.
6. Irritating and poisonous materials.



Flow Chart for Solvent Recover System


Model Selection

Double Cone Rotary Vacuum Dryer SZG100
Model SZG100 SZG350 SZG500 SZG-7500 SZG1000 SZG1500 SZG2000 SZG3500 SZG5000
Volume (litre) 100L 350L 500L 750 1000L 1500L 2000L 3500 5000
Charging volume (L) 50 175 250 375 500 750 1000 1750 2500
Loading weight(kg) 40 120 200 300 400 600 800 1000 1800
Heating area(m2) 1.16 1.5 2 2.63 3.5 4.61 5.58 7.5 13.8
Rotating speed(rpm) 3~13
Motor power 0.75 1.1 1.5 2.2 3 4 5.5 7.5 15
Rotating height 1750 2100 2250 2490 2800 2940 2990 3490 4200
Desigh pressure insider the tank: ---0.1~0.15Mpa
Desigh pressure inside the jacket: ≤0.3Mpr
Total weight (Kg) 650 900 1200 1450 1970 2280 2500 2700 2900



Note

1. The above-mentioned parameters are calculated based on material density 0.6g./cm3.
2. For raw materials, if its volume has a significant change before and after drying, then its filling coefficient may be increased or decreased suitably.
3. Adjustable motor speed 0~6rpm according to user's requirement.




The following aspects should be taken into consideration when ordering

1. if certificate for pressure vessel is a requirement, please indicate that in the order.
2. if glass lining for interior surface is a requirement, please let us know.
3. If your materials are explosive, or flammable, the calculation should be made according to trial results. If material has larger specific weight, it should be noted upon placing the order.




Instructions to ordering

1. Three heat source options steam, hot water, heat conduction oil.
2. When ordering, please indicate the operation temperature of the dryer in order to choose or provide the suitable heat source for you.
3. When drying viscous raw material, our factory will design a special stirring device in the chamber.
4. The auxiliary parts of the vacuum drying system can be supplied and installed by our factory. Please indicate when ordering.
5. If you have any special requirements, our factory can also design, manufacture and install as requested.



Send Inquiry

Contact Information
Whatsapp: +86-13806125772
Wechat: 13806125772
Tel: +86-519-88908521
Fax: +86-519-88908383
Email: sale@cz-ym.com
Add: Jiaoxi Town, Changzhou City, Jiangsu Province, China
Copyright © 2023 Changzhou Yimin Drying Equipment Co., Ltd. All Rights Reserved
+86-13806125772
+86-519-88908521
sale@cz-ym.com
Copyright 2018-2023 Yimin Drying